Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12104/66927
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPerez-Fonseca, A.A.
dc.contributor.authorGomez, C.
dc.contributor.authorDavila, H.
dc.contributor.authorGonzalez-Nunez, R.
dc.contributor.authorRobledo-Ortiz, J.R.
dc.contributor.authorVazquez-Lepe, M.O.
dc.contributor.authorHerrera-Gomez, A.
dc.date.accessioned2015-11-19T18:51:43Z-
dc.date.available2015-11-19T18:51:43Z-
dc.date.issued2012
dc.identifier.urihttp://hdl.handle.net/20.500.12104/66927-
dc.description.abstractComposites of high-density polyethylene and agave fibers coated with chitosan were used as adsorbent for Cr(VI). The adsorptions were made in batch and continuous systems. Different kinetic models were used to characterize the batch adsorption and to determine the adsorption capacity of the compound. To test the composite regeneration/reuse capability, the chromium content in the composite material was desorbed using different acids. The coated composites were characterized by scanning electron microscopy (SEM), attenuated total reflectance infrared spectroscopy (ATR-IR), and X-ray photoelectric spectroscopy (XPS). From the results it was found that the composite has a maximum adsorption capacity of 200 mg Cr(VI)/g of chitosan at pH 4. Sulfuric acid proved to be a good desorbent of Cr(VI), allowing the material to be reused while keeping its adsorption properties. Finally, the results showed that the continuous system has higher sorption capacity than the batch system; it was determined that the system needs a minimum retention time of 20 min in order to use the material in the treatment of contaminated effluents. © 2011 American Chemical Society.
dc.titleChitosan supported onto agave fiber'postconsumer HDPE composites for Cr(VI) adsorption
dc.typeConference Paper
dc.identifier.doi10.1021/ie201242x
dc.relation.ispartofjournalIndustrial and Engineering Chemistry Research
dc.relation.ispartofvolume51
dc.relation.ispartofissue17
dc.relation.ispartofpage5939
dc.relation.ispartofpage5946
dc.contributor.affiliationPérez-Fonseca, A.A., Departamento de Ingeniería Química, Universidad de Guadalajara, 44430 Jalisco, Mexico; Gómez, C., Departamento de Ingeniería Química, Universidad de Guadalajara, 44430 Jalisco, Mexico; Dávila, H., Departamento de Ingeniería Química, Universidad de Guadalajara, 44430 Jalisco, Mexico; González-Núñez, R., Departamento de Ingeniería Química, Universidad de Guadalajara, 44430 Jalisco, Mexico; Robledo-Ortíz, J.R., Departamento de Madera, Celulosa y Papel, Universidad de Guadalajara, 45510 Jalisco, Mexico; Vázquez-Lepe, M.O., CINVESTAV-IPN, 76230 Querétaro, Mexico; Herrera-Gómez, A., CINVESTAV-IPN, 76230 Querétaro, Mexico
dc.relation.isReferencedByScopus
dc.relation.isReferencedByChemAbsS
dc.relation.isReferencedByWOS
dc.identifier.urlhttp://www.scopus.com/inward/record.url?eid=2-s2.0-84860458566&partnerID=40&md5=82b2df067e0f0607c1fab23f645b8f61
dc.identifier.urlhttp://dx.doi.org/10.1021/ie201242x
Appears in Collections:Producción científica UdeG (prueba)

Files in This Item:
There are no files associated with this item.


Items in RIUdeG are protected by copyright, with all rights reserved, unless otherwise indicated.