Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12104/42819
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLopez-Serrano, F.-
dc.contributor.authorLopez-Aguitar, J.E.-
dc.contributor.authorMendizábal, E. M.-
dc.contributor.authorPuig, J.E.-
dc.contributor.authorAlvarez, J.-
dc.date.accessioned2015-09-15T18:23:46Z-
dc.date.available2015-09-15T18:23:46Z-
dc.date.issued2008-
dc.identifier.urihttp://www.scopus.com/inward/record.url?eid=2-s2.0-55049085333&partnerID=40&md5=248609443e7b932813beaac6536bd377-
dc.identifier.urihttp://hdl.handle.net/20.500.12104/42819-
dc.description.abstractIn this work, the microemulsion polymerization modeling problem is addressed with an integrodifferential approach. The procedure was applied to experimental data, previously presented, on the microemulsion polymerization of hexyl methacrylate (C6MA) and styrene (STY). It was found that: (i) the nucleation rate is not linear with time, as assumed before, (ii) a vitreous effect is observed even in reactions where the polymer's glass transition temperature is lower than the reaction temperature, (iii) radical entry to polymer particles and coagulation among particles are negligible, (iv) the rate decrease interval is also caused by a reduction of active sites, (v) a mechanism in which micelles provide monomer to living particles was detected, and (vi) a simple three-parameter mechanistic model was obtained, capable of describing the studied systems. Copyright © 2008 WILEY-VCH Verlag GmbH & Co. KGaA.-
dc.relation.isreferencedbyScopus-
dc.titleMicroemulsion polymerization modeling based on the experimental conversion trend and its derivative-
dc.typeConference Paper-
dc.identifier.doi10.1002/masy.200851110-
dc.relation.ispartofjournalMacromolecular Symposia-
dc.relation.ispartofvolume271-
dc.relation.ispartofissue1-
dc.relation.ispartofpage94-
dc.relation.ispartofpage98-
dc.subject.keywordKinetics; Mechanism; Microemulsion polymerization; Modeling-
dc.contributor.affiliationLópez-Serrano, F., Facultad de Química, Dcpartamcnto de Ingeniería Química, Universidad Nacional Autónoma de México, D. F. 04510, Mexico; López-Aguitar, J.E., Facultad de Química, Dcpartamcnto de Ingeniería Química, Universidad Nacional Autónoma de México, D. F. 04510, Mexico; Mendizábal, E., CUCEI, Departamentos de Química e Ingeniería Química, Universidad dc Guadalajara, Guadalajara, Jalisco, 44430, Mexico; Puig, J.E., CUCEI, Departamentos de Química e Ingeniería Química, Universidad dc Guadalajara, Guadalajara, Jalisco, 44430, Mexico; Álvarez, J., Departamento de Ingeniería Química e Hidráulica, Universidad Autónoma Metropolitana-Iztapalapa, D. F. 09340, Mexico-
dc.contributor.affiliationMendizábal, E. M., Universidad de Guadalajara. Centro Universitario de Ciencias Exactas e Ingenierías-
Appears in Collections:Producción científica UdeG

Files in This Item:
There are no files associated with this item.


Items in RIUdeG are protected by copyright, with all rights reserved, unless otherwise indicated.