Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12104/39990
Title: Characterization of a triboelectric x-ray spectrum
Author: Olmos, L.
Lemus-Ruiz, J.
Vergara Hernandez, H.J.
Jimenez, O.
Salgado, L.J.M.
Tena-Martinez, J.J.
Issue Date: 2014
Abstract: Nowadays, sintering is a very useful technique to fabricate metal, ceramic and composites parts for different applications. This phenomenon has been extensively studied over 50 years and, most of the research related to it used a model based on two contacting particles. However, just a few jobs were focused on the powder sintering on a solid substrate. This work investigates the effect of two parameters; substrate shape and inclusion of the reinforced particles on the evolving microstructure during sintering of particles on a rigid substrate. Powders and solid bars of copper are used as a model material and particles such as tungsten carbide (WC) as reinforcing particles. Sintering was performed in an electrical furnace at 1050 °C under reducing atmosphere. The progress on sintering was evaluated by measuring the relative density close and far from the solid substrate by means of the image analysis from pictures taken by scanning electronic microscope (SEM). The effects on the constraint sintering were also identified. Heterogeneous densification and delamination of the film from the substrate were observed as densification increased which by the way is reduced by the inclusion of the reinforced particles. " (2014) Trans Tech Publications, Switzerland.",,,,,,,,,"http://hdl.handle.net/20.500.12104/39990","http://www.scopus.com/inward/record.url?eid=2-s2.0-84904573603&partnerID=40&md5=f5231656cbef31653fa886e78e90c0c5",,,,,,,,"Materials Science Forum",,"135
141",,"793",,"Scopus",,,,,,"Constraint sintering; Copper powders; Delamination; MMC films; Sintering",,,,,,"Characterization of constrained sintering of powders on solid substrate",,"Conference Paper" "41767","123456789/35008",,"Moya-Sánchez, E.U., Departamento de Física, CUCEI, Universidad de Guadalajara, Mexico; Romo-Espejel, J.A., Departamento de Física, CUCEI, Universidad de Guadalajara, Mexico; Aceves-Aldrete, F.J., Departamento de Física, CUCEI, Universidad de Guadalajara, Mexico",,"Moya-Sanchez, E.U.
Romo-Espejel, J.A.
Aceves-Aldrete, F.J.",,"2012",,"Low-energy X-ray imaging system has been useful in medical diagnostic in order to obtain high contrast in soft tissue. Recently, Camara et al. and most recently Hird et al. have produced low-energy X-rays using a triboelectric effect. The main aim of this work is to characterize the penetration (beam quality) of a triboelectric X-ray source in terms of the computed Half Value Layer (HVL). Additionally, the computed HVL of the triboelectric X-ray source has been compared with the HVL of X-ray tube Mo-anode (Apogee 5000). According to our computations the triboelectric X-ray source has a similar penetration such as a X-ray tube source. " 2012 American Institute of Physics.
URI: http://hdl.handle.net/20.500.12104/39988
http://www.scopus.com/inward/record.url?eid=2-s2.0-84873637623&partnerID=40&md5=c9819bf25638ed120fb138f93a35f997
Appears in Collections:Producción científica UdeG

Files in This Item:
There are no files associated with this item.


Items in RIUdeG are protected by copyright, with all rights reserved, unless otherwise indicated.