Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.12104/39245
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSanchez-Soto, M.
dc.contributor.authorIllescas, S.
dc.contributor.authorAbt, T.
dc.contributor.authorCandal, M.V.
dc.contributor.authorGomez, J.F.
dc.date.accessioned2015-09-15T17:15:31Z-
dc.date.available2015-09-15T17:15:31Z-
dc.date.issued2011
dc.identifier.urihttp://hdl.handle.net/20.500.12104/39245-
dc.identifier.urihttp://www.scopus.com/inward/record.url?eid=2-s2.0-84857879360&partnerID=40&md5=7607812e2a7795eba6aa0280d03346cc
dc.description.abstractIn this work, a hybrid polypropylene (PP)/steel car part (Traverse leg) was created by over moulding. PP was modified with 10%wt. of PP-g-Ma coupling agent. Different surface treatments were applied to the steel determining its influence on adhesion. Best peel strength was reached when the steel was sanded. Etching and shot peened plates showed similar but lower levels of adhesion. In all cases, the application of torch heating was necessary to create a thin layer of iron oxide strongly bonded to the steel and by reaction to the PP-g-Ma. To create adhesion a minimum steel temperature of 120°C was necessary.
dc.relation.isreferencedbyScopus
dc.titleAdhesion between polypropylene and steel by over moulding
dc.typeConference Paper
dc.relation.ispartofjournalSociety of Plastics Engineers - EUROTEC 2011 Conference Proceedings
dc.subject.keywordAdhesion; Over moulding; Polypropylene; Steel
dc.contributor.affiliationSánchez-Soto, M., Centre Catala Del Plastic, Universitat Politécnica de Catalunya, C/Colom no 114, Terrassa (Barcelona), Spain; Illescas, S., Centre Catala Del Plastic, Universitat Politécnica de Catalunya, C/Colom no 114, Terrassa (Barcelona), Spain; Abt, T., Centre Catala Del Plastic, Universitat Politécnica de Catalunya, C/Colom no 114, Terrassa (Barcelona), Spain; Candal, M.V., Universidad Simón Bolivar, Departamento de Mecúnica, Sección Polímeros, Apartado 89000, Caracas 1080-A, Venezuela; Gómez, J.F., Universidad de Guadalajara, Guadalajara, Mexico
Appears in Collections:Producción científica UdeG

Files in This Item:
There are no files associated with this item.


Items in RIUdeG are protected by copyright, with all rights reserved, unless otherwise indicated.