Please use this identifier to cite or link to this item:
|Title:||Adhesion between polypropylene and steel by over moulding|
|Abstract:||In this work, a hybrid polypropylene (PP)/steel car part (Traverse leg) was created by over moulding. PP was modified with 10%wt. of PP-g-Ma coupling agent. Different surface treatments were applied to the steel determining its influence on adhesion. Best peel strength was reached when the steel was sanded. Etching and shot peened plates showed similar but lower levels of adhesion. In all cases, the application of torch heating was necessary to create a thin layer of iron oxide strongly bonded to the steel and by reaction to the PP-g-Ma. To create adhesion a minimum steel temperature of 120°C was necessary.|
|Appears in Collections:||Producción científica UdeG|
Files in This Item:
There are no files associated with this item.
Items in RIUdeG are protected by copyright, with all rights reserved, unless otherwise indicated.